27mm – 42mm Tie Rod End Wrench Removal With 1/2″ Square Drive Tool #ad - – master tie rod tools easily replace inner tie rod ends, suitable for tie rods between 27mm and 42mm in diameter. Item descriptions, easily removes inner tie rod ends without disassembling rack and pinion., Designed specifically for the removal of the direction of the steering rod., Specially designed to be used with 1/2″ square drive tools, applicable to various vehicles benz, bmw, toyota, hona, ford,nissan,etc package tie rod end wrench removal tool x 1 item specifications capacity27-42mm materialsae 1045.
CTA Tools 4014 Inner Tie Rod Tool #ad - California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. Will service tie rods with flats and smooth tie rods. Slide tool over end and tighten collar to allow access with 3/8-inch drive extension. Cta tools 4014 inner tie rod tool removes inner tie rods without removing outer tie rods.
OEMTOOLS 27025 Tie Rod Separator #ad - Forged and heat treated for strength. Can be used for tie rod end, pitman arm and ball joint removal. The opening is 21/32-inch. Simply insert between the parts to be separated and hammer the end, thus breaking the parts free. If you are reusing any of these parts use the damage free type of tool. This type of tool (wedge) will damage the dust seal on the parts that are being removed with this tool.
S&G Tool Aid (92350) Universal Joint and Tie Rod Tool #ad - Durable constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use. Versatile universal for use on both american domestic and european imported/foreign vehicles for cars, trucks, and even atvs. Specifications 1-1/8″ and 2-1/8″ (30mm and 56mm) maximum opening capacity accepts 3/4″ sockets or wrenches 4/5″ (20mm) fork opening 9/10″ (48mm) adjustable height can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles scissors-type design. Practical the abn universal ball joint separator, remover tool for separating arms, tie rods, and ball joints on cars, trucks, atvs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm. Universal joint & tie rod tool, 498″.
Astro 78812 Inner Tie Rod Tool #ad - All the user needs to do is slide the tool over the end, and tighten collar to allow access with 3/8-inch tool. The astro 78812 inner tie rod tool removes inner tie rods without touching outer tie rods. It works on 1. 25″ to 2″ tie rods with flats and smooth tie rods and is built with forged steel for long lasting reliability.
Performance Tool W80558 Inner Tie Rod Tool #ad - Removes and installs inner tie rods without removing steering gear assembly. Heavy duty alloy steel with black oxide finish. Sizes 1-3/16–inch for some ford and renault 1-5/16–inch for ford, gm and chrysler. Has dual socket end.
Performance Tool W83027 Inner Tie Rod Tool #ad - Use to easily turn inner tie rod ends that are smooth or have flats. The low profile design fits into tight spaces and easily stores away, not a large bulky tool. Can also be used on all inner tie rods with a 1-3/16 and 1-5/16 in hex. An inexpensive way to remove inner tie rods without removing the outer tie rod first.
OTC 7023 Universal Tie Rod Adjusting Tool #ad - Has a four-position feature and 360 degree rotation. Fits most models of compact and standard-size cars and light trucks. Lifetime limited warranty. Lets you locate the tool to grip the sleeve correctly even when access is limited.
Specialty Products Company 77350 Heavy Duty Tie Rod Tool #ad - The extra long bar gives you maximum leverage to loosen rusted sleeves without injuring your knuckles. Specialty products company (spc) 77350 heavy duty tie rod tool this tool is specifically designed for use on the new ford super duty chassis as well as most other light trucks and vans. This 8 position tool allows 360 degrees rotation without removing the adjuster block from the sleeve.
ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs #ad - Versatile universal for use on both american domestic and european imported/foreign vehicles for cars, trucks, and even atvs. Practical the abn universal ball joint separator, remover tool for separating arms, tie rods, and ball joints on cars, trucks, atvs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm. Specifications 1-1/8″ and 2-1/8″ (30mm and 56mm) maximum opening capacity accepts 3/4″ sockets or wrenches 4/5″ (20mm) fork opening 9/10″ (48mm) adjustable height can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles scissors-type design. Durable constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use. Easy to use slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance tap the attachment point and or the finger with a hammer and tighten some more and tap again when the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”.
GearWrench 3312 Deluxe Inner Tie Rod Tool #ad - Rust resistant finish. To use, simply insert tool between spindle arm and tie rod, or drag link and steering arm tool is universal in application for many car makes. Deluxe inner tie rod tool. Will not damage tie rod end dust boot.
OEMTOOLS 27276 Tie Rod End Remover #ad - Rust resistant finish. Tool comes with pressure screw tip swivels for damage free results. Will not damage tie rod end dust boot. To use, simply insert tool between spindle arm and tie rod, or drag link and steering arm tool is universal in application for many car makes.
Genius Tools Inner Tie Rod Tool Set AT-4808 #ad - The inner tie rod can be easily removed and installed by slipping the long socket over the tie rod end and connecting it to the open-jaw driver. The long socket can be easily used with seven open-jaw drivers, size 1-3/16 1-1/4 1-5/16 1-7/16 14mm, 17mm and 33. 6mm open jaw driver 000800 1-3/16″ open jaw driver 000800 1-1/4″ open jaw driver 000800 1-5/16″ open jaw driver 000800 1-7/16″ open jaw driver 000800 long socket 005500 plastic case these tools are specially designed for the inner tie rods that are inaccessible to adjust. 14mm open jaw driver 000800 17mm open jaw driver 000800 33. 6mm, to most application.
Lisle 54500 Large Inner Tie Rod Tool #ad - This tool comes with four crows feet, sizes 1-7/16 inch , 33. 6mm, 38. 4mm and 42mm, to fit many toyota, nissan, ford, lincoln, mercury and chevrolet truck and suv applications. The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation. Also fits some cadillac escalade, hummer h2, honda passport and jeep liberty applications.
ABN Inner Tie Rod Tool – 3/8” Inch Low Profile Tool for Inner Tie Rod Removal/Installation #ad - Compatible for all standard tie rods with smooth cylinder ends will work on any rod that fits between the 3″ top and bottom components with both 9/16″ nuts screwed on and tightened. Easy to use slide tool over end and tighten collar to allow access with a 3/8″ drive extension adapters can be used for larger breaker bars/extensions. Convenient compact/low profile design means no bulky tool to store inexpensive and effective way to turn smooth tie rod ends. Practical use the abn inner tie rod tool 3/8″ inch to remove inner tie rods without having to extract outer tie rods. Strong grip tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn as necessary.
OEMTOOLS 27178 Master Inner Tie Rod Tool Set #ad - Tube handle inner diameter is 2125 in to service small cars, pick-ups and large suvs. Crowfoot adapters are nickel plated for durability. Comes in a blow mold case. Includes 12 crowfoot style adapters sizes 29 mm, 1-3/16 in, 1-1/4 in, 325 mm, 1-5/16 in, 336 mm, 1-3/8 in, 1-7/16 in, 1-1/2 in, 384 mm, 40 mm and 42 mm. 1/2 in drive tube handle makes it easy to remove and reinstall to proper torque.
Westward 1MZL7 Adjusting Tie Rod Tool, 3/4 In #ad - Robust puller for heavy duty removal. 2 1/6 inch yoke opening. For use on compact cars and smaller pitman arms. Heat treated pressure screw head for striking during removal of arm. Small design for tight areas.
Mayhew 29915 Tie Rod Tool Repair Kit #ad - For use on round, hexagonal and octagonal tie rods. Used to remove and mount inner tie rods on vehicles. Unlimited lifetime warranty. Extended shaft and narrow profile allows for use in hard-to-reach and confined spaces. Fits 35-45mm tie rods with no additional interchangeable adapters.
Universal Ball Joint Separator and Tie Rod Tool by Shankly – Removes even Stubborn Ball Joints from Spindle – Perfect for Front Wheel Cars. Ball Joint Remover with Steel Body and Bolt. #ad - Universal and reliable shankly’s ball joint removal tool is suitable and operating on the majority of domestic and import front wheel drive vehicles. A powerful ball joint tool this ball joint separator tool splits ball joints, tie rods, anti-roll bar mountings, and helps with everything an automotive repair shop needs in ball joint and tie rod replacement. Totally convenient tie rod end tool with a wide opening at 17mm (product length 25 mm), it can be used on most front wheel drive auto vehicles not ideal for all large suv’s much more maneuverable than traditional pickle fork. Agile and clever in places where limited space prevents use of a direct action method, the shankly ball joint tool will spread ball joints easily, thus helping the mechanic maneuver in tight spaces faster, easily, and effortlessly. Long use and durability shankly’s ball joint puller has a heat-treated drop forged steel body in order to handle long and rough usage it’s a tool designed to hold first place in every mechanic’s tool kit.
OEMTOOLS 25296 Inner Tie Rod Tool #ad - Removes and installs inner tie rods on many gm and some chrysler products. Used to easily turn tie rods. Used to service inner tie rods on rack and pinion steering assemblies. Can also be used on all innter tie rods with 1-3/16 and 1-5/16 in hex sizes.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.