Best and Coolest 21 Edelbrock Performers

 

Edelbrock 1400 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke New Carburetor
Edelbrock 1400 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke New Carburetor
Edelbrock 1400 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke New Carburetor - Single feed fuel inlet with air valve secondary type. Shiny silver finish and calibrated for gasoline. Primary venturi booster is a bottom feed design for smoother acceleration and better drivability. Electric choke with 4-barrel square bore carburetor flange. Backed by edelbrock’s exclusive 90 day warranty.

 

Edelbrock 3761 Performer Intake Manifold
Edelbrock 3761 Performer Intake Manifold
Edelbrock 3761 Performer Intake Manifold - Intake is made of aluminum material with a natural finish. Performer intake is 50-state street legal, when used with the correct carburetor and in the correct application. Patented design with egr (electronic gas recirculation). Intake style is dual plane and carburetor quantity is single. Basic operating rpm is from idle to 5,500 rpm.

 

Edelbrock 3702 Performer-Plus Camshaft and Lifter Kit
Edelbrock 3702 Performer-Plus Camshaft and Lifter Kit
Edelbrock 3702 Performer-Plus Camshaft and Lifter Kit - Use only stock ratio rocker arms which are not included with the kit. Hydraulic flat tappet style camshaft and lifter. Retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, gaskets and lifters are not included. Dual springs should not be included. Offers improved throttle response and torque.

 

BBK 1520 38 Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 50L Intake Manifold
BBK 1520 3/8″ Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 5.0L Intake Manifold
BBK 1520 3/8″ Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 5.0L Intake Manifold - Non heat transfering phenolic material reduces upper intake manifold temepratures for reduced air intake temperatures. Easy to install, includes new longer hardware and 2 new gaskets. Offers increased valve cover clearance for larger rockers and valve covers. Bbk is your number one aftermarket performance brand in the usa, american designed and built. Cooler intake temperatures allow denser air for improved performance.

 

Edelbrock 1407 Performer 750 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor
Edelbrock 1407 Performer 750 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor
Edelbrock 1407 Performer 750 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor - Backed by edelbrock’s exclusive 90 day warranty. Shiny silver finish and calibrated for gasoline. Manual choke with 4-barrel square bore carburetor flange. Single feed fuel inlet with air valve secondary type. Primary venturi booster is a bottom feed design for smoother acceleration and better drivability.

 

Edelbrock 20254 Performer RPM Dual-Quad Air-Gap Manifold and Carburetor Kit
Edelbrock 20254 Performer RPM Dual-Quad Air-Gap Manifold and Carburetor Kit
Edelbrock 20254 Performer RPM Dual-Quad Air-Gap Manifold and Carburetor Kit - Comes with the new endurashine finish and a bright silver chrome look. Does not fade, oxidize, or discolor. Includes dual-quad air-gap intake manifold, intake gasket kit, high-tech progressive linkage, braided fuel line, and a pair of thunder avs 500 cfm carburetor, one with manual choke and one electric choke. Highly durable.

 

Edelbrock 7562 Performer RPM Air-Gap Intake Manifold
Edelbrock 7562 Performer RPM Air-Gap Intake Manifold
Edelbrock 7562 Performer RPM Air-Gap Intake Manifold - No egr provisions, street legal for pre-emissions equipped engines and vehicles. Incorporates the race-winning technology. Will not fit under stock hood of corvette. Ranges from idle-5,500 rpm up to 1,500-6,500 rpm. Includes rear water outlets, two distributor clamp locations and nitrous bosses.

 

Edelbrock 2131 Performer Aluminum Intake Manifold
Edelbrock 2131 Performer Aluminum Intake Manifold
Edelbrock 2131 Performer Aluminum Intake Manifold - These manifolds also deliver improved throttle response over stock intakes and are available with non-egr styles. The performers are ideal for passenger cars, trucks, tow vehicles and rv’s. This combination boosts torque over a wide rpm range, from off-idle all the way up to 5,500 rpm. The edelbrock performer manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

 

Edelbrock 27033 Performer EPS Intake Manifold Black Idle-5500rpm Non-EGR Dual-Plane wOil Fill Tube Performer EPS Intake Manifold
Edelbrock 27033 Performer EPS Intake Manifold Black Idle-5500rpm Non-EGR Dual-Plane w/Oil Fill Tube Performer EPS Intake Manifold
Edelbrock 27033 Performer EPS Intake Manifold Black Idle-5500rpm Non-EGR Dual-Plane w/Oil Fill Tube Performer EPS Intake Manifold - Designed for 1986 and earlier 262-400 cubic-inch chevys, the performer eps dual-plane intake manifold is optimized to deliver superior performance with edelbrock square-bore performer series or thunder series avs carburetors. Includes oil fill tube (not installed) and matching push-in breather cap. Camshaft recommendations #2102, #2103, #2208, #2209. 80″ carb pad height 4. Of torque over the edelbrock performer manifold #2101 on a 350 chevy. #2703 has the same performance features as the performer eps #2701. 87″. Will not fit under stock corvette hood. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. 27″. 15″ x 1. The oil fill tube and breather are also available separately as #4803. Performer eps manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our classic valve covers with no breathers. Of torque for more performance where you need it most. Carburetor recommendations edelbrock thunder series avs or performer series carb, 500-650 cfm. Manifold ht a-3. Match with a dependable edelbrock square-bore carburetor for maximum performance gains. Port exit dimensions 1. Dyno tests showed gains of 5 hp and 9 ft-lbs. Also available with choice of four finishes. 74″, b-4. This small-block chevy manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Installation notes recommended intake gasket edelbrock #7201.

 

Edelbrock 1721 Performer Series Street Fuel Pump
Edelbrock 1721 Performer Series Street Fuel Pump
Edelbrock 1721 Performer Series Street Fuel Pump - The fuel pumps have a unique valve design that improves flow quantity and quality, and can support engines with up to 550 horsepower. They have six valves and a free-flow capacity of 110 gallons per hour. The edelbrock performer series street fuel pumps are designed to match the performer series carburetors.

 

Edelbrock 2161 Performer Intake Manifold
Edelbrock 2161 Performer Intake Manifold
Edelbrock 2161 Performer Intake Manifold - The performers are ideal for passenger cars, boats, tow vehicles and rv’s. The edelbrock performer manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. These manifolds also deliver improved throttle response over stock intakes and are available with non-egr styles. This combination boosts torque over a wide rpm range, from off-idle all the way up to 5,500 rpm. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

 

Edelbrock 2176 Performer Aluminum Intake Manifold
Edelbrock 2176 Performer Aluminum Intake Manifold
Edelbrock 2176 Performer Aluminum Intake Manifold - These manifolds also deliver improved throttle response over stock intakes and are available with non-egr styles. The performers are ideal for passenger cars, boats, tow vehicles and rv’s. This combination boosts torque over a wide rpm range, from off-idle all the way up to 5,500 rpm. The edelbrock performer manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

 

Edelbrock 27011 Performer EPS Polished Aluminum Intake Manifold
Edelbrock 27011 Performer EPS Polished Aluminum Intake Manifold
Edelbrock 27011 Performer EPS Polished Aluminum Intake Manifold - The edelbrock performer intake manifold is optimized to deliver superior performance with square-bore carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9ft/pounds and torque across the entire rpm range over their own performer manifolds. Horsepower gains from idle to 5,500 rpm, when used with performer series square-bore or thunder series avs carburetors. It is optimized to deliver superior performance with square-bore carburetors.

 

Edelbrock 1403 Performer Carburetor
Edelbrock 1403 Performer Carburetor
Edelbrock 1403 Performer Carburetor - It controls the float level, atomizes the fuel into a useable air / fuel mixture in the proper proportions and transition between circuits. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. It uses easily changed metering rods for precise tuning and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. The edelbrock performer carburetor features two-piece aluminum construction for cooler operating temperatures and less warping.

 

Edelbrock 8103 ProClassic Fuel Hose Complete Fuel Pump To Carb Fuel Hose wCompetition Fuel Filter With 38in NPT To 58in-20 Fuel Inlet on Edelbrock Performer and Thunder Series AVS Carbs ProClassic Fuel Hose
Edelbrock 8103 ProClassic Fuel Hose Complete Fuel Pump To Carb Fuel Hose w/Competition Fuel Filter With 3/8in. NPT To 5/8in.-20 Fuel Inlet on Edelbrock Performer and Thunder Series AVS Carbs ProClassic Fuel Hose
Edelbrock 8103 ProClassic Fuel Hose Complete Fuel Pump To Carb Fuel Hose w/Competition Fuel Filter With 3/8in. NPT To 5/8in.-20 Fuel Inlet on Edelbrock Performer and Thunder Series AVS Carbs ProClassic Fuel Hose - Will work with oem or equivalent fuel pumps. They are manufactured with russell proclassic hose and include fuel filter, 5/8″ -20 banjo bolt and gaskets. These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8″ npt to the 5/8″ -20 fuel inlet on edelbrock performer series and thunder series avs carbs.

 

Edelbrock 1479 Performer Series Carburetor Calibration Kit
Edelbrock 1479 Performer Series Carburetor Calibration Kit
Edelbrock 1479 Performer Series Carburetor Calibration Kit - Includes all the parts needed to give the best performance. Components and quantities are specifically tailored for each carburetor. Sold as a kit. It offers more volume with optional single or dual inlet for total fuel plumbing flexibility. This carburetor calibration kit is for 1805 and 1405 edelbrock performance series carburetor.

 

Edelbrock 7101 Performer RPM Intake Manifold
Edelbrock 7101 Performer RPM Intake Manifold
Edelbrock 7101 Performer RPM Intake Manifold - A performer rpm intake gives you the ultimate in street high-performance. The performer rpms have larger plenums and runners to match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. It provides power like a single-plane and throttle response like a dual-plane. 25. 20 and the rear 5. The performer rpms are dual-plane, high-rise intakes with a 180 degree firing order. It is not for emissions-equipped engines. This manifold produces incredible top-end horsepower while retaining good throttle response. The front height of the manifold measures 4. The edelbrock performer rpm intake manifold is intended for high-performance street or competition engines that run up to 6,500 rpm with maximum power.

 

BBK 15202 EFI Intake Manifold Gasket Set - Upper - Lower Kit for Edelbrock Ford 302 351 Performer Manifold Pack of 2
BBK 15202 EFI Intake Manifold Gasket Set – Upper – Lower Kit for Edelbrock Ford 302, 351 Performer Manifold (Pack of 2)
BBK 15202 EFI Intake Manifold Gasket Set – Upper – Lower Kit for Edelbrock Ford 302, 351 Performer Manifold (Pack of 2) - Sold as a pair, fits between upper and lower intake manifold on all edelbrock performance and rpm intake manifolds. Designed for higher temperature performance applications. Bbk is your number one aftermarket performance brand in the usa, american designed and built. Premium gasket material ensures leak free seal every time. Port matched for optimum air flow.

 

Edelbrock 2701 Performer Intake Manifold
Edelbrock 2701 Performer Intake Manifold
Edelbrock 2701 Performer Intake Manifold - The edelbrock performer intake manifold delivers superior performance with square-bore carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire rpm range over their own performer manifolds. Horsepower gains from idle to 5,500 rpm, when used with performer series square-bore or thunder series avs carburetors.

 

Edelbrock 7561 Performer RPM Air Gap Intake Manifold wBoltsGasketsRTV - BBC Oval Port
Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV – BBC Oval Port
Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV – BBC Oval Port - The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. The rpm air-gap incorporates the same race-winning technology that’s been used on our victor series competition intakes for decades. Rpm air-gap 2-o (1500-6500 rpm) designed for street 396-502 c. Gasket carburetor stud kit (part # 59) this intake works with square bore carburetors. For square bore carburetors only. They’re precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. D. Part # 7561. I. Arp’s rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. Chevy v8’s with large oval-port cylinder heads (1975 and earlier) or edelbrock performer/performer rpm heads. We’ve put together a proven kit to take the guesswork out of choosing the right components for your performance oval port bbc engine edelbrock performer rpm air gap intake manifold. No provision for exhaust heated chokes and no exhaust crossover. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Part # 135-2001. This listing is for an intake kit for the big block chevy with oval port heads consisting of an edelbrock performer rpm air gap intake manifold (part #7561), edelbrock intake manifold gasket set (part # 7203), arp black oxide intake manifold bolt set (part # 135-2001), permatex black rtv (part #82180) and mr. Will not fit under stock hood of corvette, 1964-67 chevelle or 1967-81 camaro arp black oxide intake manifold bolt set. Accepts all late model alternator and a/c brackets for the street. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading.

 

Edelbrock 60779 Performer RPM Cylinder Head
Edelbrock 60779 Performer RPM Cylinder Head
Edelbrock 60779 Performer RPM Cylinder Head - Intake and exhaust runners are cnc-machine profiled for superior flow and performance. High-flow 202″ intake valve and 160 exhaust valve. Includes phosphor-bronze valve guides, interlocking ductile iron valve seats. Improved power throughout the rpm range for greater throttle response and top-end horsepower. 63cc combustion chamber along with a 171cc intake port.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.