22 Top Shorty Headers

 

Pacesetter 70-1358 Shorty Header Non-CARB Compliant
Pacesetter 70-1358 Shorty Header (Non-CARB Compliant)
Pacesetter 70-1358 Shorty Header (Non-CARB Compliant) - Fits in stock location, no fabrication needed this item is not for sale in california/non carb compliant. Necessary gaskets and fasteners are included. Port-matched cnc machined 3/8″ thick flanges. Primaries are sequenced into the collector for the best scavenging. One-piece design for easier installation.

 

Ford Big Block BBF Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold - FE 330-428
Ford Big Block BBF Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold – FE 330-428
Ford Big Block BBF Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold – FE 330-428 - The exhaust manifolds found on the 1967-1975 ford big block fe engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 shorty style off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. These improvements free up lost horsepower and torque. 4l(332ci), 5. Tubing has been optimized for the 5. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. 6l(406ci) and 7. An added benefit is a more performance oriented exhaust sound. 9l(361ci), 6. 8l(352ci), 5. Package included1 x set of exhaust headerscompatible withford big block engine 332/ 352/ 361/ 406/ 410/ 427will not fit edelbrock upgraded heads #6005 or #6006 (three bolt exhaust port)will fit edelbrock upgraded heads #6007 or #6008 (two bolt exhaust port). 4l(390ci), 6. 0l(427ci) engines.

 

Pypes Exhaust HDR52S 1994-1995 Mustang GT Short Tube Shorty Headers
Pypes Exhaust HDR52S 1994-1995 Mustang GT Short Tube Shorty Headers
Pypes Exhaust HDR52S 1994-1995 Mustang GT Short Tube Shorty Headers - Shorty headers for the 1994-1995 mustang gt 50. Comes with pypes’ lifetime warranty. 1-5/8″ tube diameter egr tube built into headers. Pypes performance exhaust # hdr52s. Direct bolt-in installation with bolts and gaskets included.

 

speedracingturbo FOR FORD BIG BLOCK 330360390-428 5464-70 FE SHORTY HEADER EXHAUST MANIFOLD
speedracingturbo FOR FORD BIG BLOCK 330/360/390-428 5.4/6.4-7.0 FE SHORTY HEADER EXHAUST MANIFOLD
speedracingturbo FOR FORD BIG BLOCK 330/360/390-428 5.4/6.4-7.0 FE SHORTY HEADER EXHAUST MANIFOLD - Tubing has been optimized for the 5. The exhaust manifolds found on the 1967-1975 ford big block fe engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. 9l(361ci), 6. Our 4-1 shorty style off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. 8l(352ci), 5. 6l(406ci) and 7. Include 1 x set of exhaust headers hardware as shown in the picture above features bbf fe shorty headers(pair) huge 1 3/4″ stainless primary tubes header outlet 3-1/2″ 3/8″ thick flanges cnc mandrel bent pipes for excellent flow 4 to 1 header design exits to the rear includes gaskets and collector bolts professionally tigged welds will not fit edelbrock upgraded heads notes 100% brand new professional installation is highly recommended installation instruction is not included modifications may be required for proper fitment. 4l(332ci), 5. 0l(427ci) engines. These improvements free up lost horsepower and torque. 4l(390ci), 6. An added benefit is a more performance oriented exhaust sound. This creates a reduction in cylinder backpressure and improved exhaust gas velocity.

 

Stainless Steel Shorty Headers Chevy 396 402 427 454 502 BBC Camaro Chevelle
Stainless Steel Shorty Headers Chevy 396 402 427 454 502 BBC Camaro Chevelle
Stainless Steel Shorty Headers Chevy 396 402 427 454 502 BBC Camaro Chevelle - Chevy 502 big block generation 6 engines with aluminum cylinder heads will have clearance problems on some applications. Fitment fit for bbc 396 402 427 454 502 v8 engines. Made form 18 gauge steel tubing for bbc shorty style headers,stainless steel ,no weld-up. 1 3/4” primary tube diameter,3000” collector diameter,3/8” thick flange. Shortie-style header maximum ground clearance.

 

NEW SOUTHWEST SPEED 55-57 CHEVY FLAT BLACK SHORTY HEADERS FOR SMALL BLOCK CHEVY ENGINES 262 265 283 302 327 350 400 V-8 1955 1956 1957 TRI-5 CHEVROLET BEL AIR 150 210 NOMAD DEL RAY
NEW SOUTHWEST SPEED 55-57 CHEVY FLAT BLACK SHORTY HEADERS FOR SMALL BLOCK CHEVY ENGINES, 262 265 283 302 327 350 400 V-8, 1955 1956 1957 TRI-5 CHEVROLET BEL AIR 150 210 NOMAD DEL RAY
NEW SOUTHWEST SPEED 55-57 CHEVY FLAT BLACK SHORTY HEADERS FOR SMALL BLOCK CHEVY ENGINES, 262 265 283 302 327 350 400 V-8, 1955 1956 1957 TRI-5 CHEVROLET BEL AIR 150 210 NOMAD DEL RAY - Applications > 1955-1957 small block chevy with original steering box or the popular gm 605 steering boxes > the passenger is much shorter to clear the idler arm cid 262, 265, 283, 302, 327, 350, 400 > fits all small block chevrolet v-8 engines with standard exhaust pattern. Features 1-1/2″ tubes with 2-1/2″ collectors, complete with header bolts and gaskets and reducer bolts and gaskets > these headers are ground parallel with 350″ flanges on the cylinder head surface, and includes a pair of 2-1/2″ to 2-1/4″ reducers to complete the installation > fits angle or straight plug heads, no spark plug or spark plug wire restrictions > note we strongly suggest you refer to measurement chart to insure headers will fit your vehicle and application, before ordering. Paint warning > these headers are painted with a high heat dull black paint > it will generally dull even more when the engine is started > the header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color> if exhaust temperatures are extreme at start the paint will blister and peel > there is no warranty on header paint. Pair of brand new southwest speed flat black shorty headers for 1955-1957 tri-5 chevy small block chevy 262-400ci engines (sws part # 440-2034) > this pair of southwest speed tri-5 shorty headers will work great for installing small block chevrolet engines in a 1955-1957 tri-five with the original steering box or the popular gm 605 steering boxes > the passenger side is much shorter to clear the the idler arm. Features > great for hot rods, street rods, rat rods, and any nostalgia rod > great choice to replace stock cast iron exhaust manifolds > more performance > better fuel mileage > 1-1/2″ tubes with 2-1/2″ collectors > includes two headers, reducers, gaskets, and hardware > painted flat black to resist early corrosion.

 

Ford F150 04-10 54L V8 Stainless Exhaust Manifold Shorty Headers Performance
Ford F150 04-10 5.4L V8 Stainless Exhaust Manifold Shorty Headers Performance
Ford F150 04-10 5.4L V8 Stainless Exhaust Manifold Shorty Headers Performance - Two exhaust headers with gaskets and bolts outlet size 2. 75″ number of o2 sensor locations 0 head flange thickness 7/16″ outlet flange thickness 3/8″ fits ford f150 5. 4l v8 years 2004-2010. 25″ primary tube size 1.

 

Flowtech 31143FLT Shorty Headers 1875 in Primary Tubing 25 in Collector Size 304 Stainless Steel Ceramic Coated Finish Gaskets Hardware Shorty Headers
Flowtech 31143FLT Shorty Headers 1.875 in. Primary Tubing 2.5 in. Collector Size 304 Stainless Steel Ceramic Coated Finish Gaskets Hardware Shorty Headers
Flowtech 31143FLT Shorty Headers 1.875 in. Primary Tubing 2.5 in. Collector Size 304 Stainless Steel Ceramic Coated Finish Gaskets Hardware Shorty Headers - They fit the popular 03-13 chevy silverado/tahoe/yukon v-8 6. 0l, 2wd/4wd. This shorty style header is popular for ls-engine swap projects. Flowtech headers are the perfect combination of quality and value.

 

For SBC Corvette Bel Air 1955-1957 Stainless Steel Hugger Shorty Headers
For SBC Corvette Bel Air 1955-1957 Stainless Steel Hugger Shorty Headers
For SBC Corvette Bel Air 1955-1957 Stainless Steel Hugger Shorty Headers - The inside of the 4 down tubes hit the head bolts. Will not fits on the passenger side if you use edelbrock aluminum heads. For 55-57 chevys with the original steering box. Made of high quality t-304 stainless steel material. 18 gauge tubes and 3/8″ flangesthe collector opening is 2 1/2″.

 

For Chevy SUVPickup Truck 48L53L V8 Stainless Exhaust Shorty Header&Gasket&Bolts
For Chevy SUV/Pickup Truck 4.8L/5.3L V8 Stainless Exhaust Shorty Header&Gasket&Bolts
For Chevy SUV/Pickup Truck 4.8L/5.3L V8 Stainless Exhaust Shorty Header&Gasket&Bolts - Metal gasket and bolts included, super light weight. Applications01 / 02 / 03 / 04 gmc yukon,00 / 01 / 02 / 03 / 04 gmc yukon xl 1500,99 / 00 / 01 / 02 / 03 / 04 / 05 gmc sierra,02 / 03 / 04 / 05 chevy avalanche 1500,99 / 00 / 01 / 02 / 03 / 04 / 05 chevy silverado 1500,00 / 01 / 02 / 03 / 04 chevy suburban 1500,00 / 01 / 02 / 03 / 04 chevy tahoe. 100% brand new, never been tried or installed. Add instant horsepower (10-15 hp). Made of high quality t-304 stainless steel with cnc.

 

Ford Big Block Hugger BBC V8 Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold - 429 460
Ford Big Block Hugger BBC V8 Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold – 429 460
Ford Big Block Hugger BBC V8 Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold – 429 460 - The exhaust manifolds found on the 1970-1978 big block ford engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 block hugger style off-road headers are designed to allow the exhaust gasses to flow more freely from each cylinder bank and combine in a more efficient manner. Block hugger style headers are meant to be used where space for long tube headers isnt available due to steering and cross member clearance issues. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. Tubing has been optimized for the 429 and 460 engines. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Package included1 x set of exhaust headerscompatible with68-87 ford big block v8 engine 429/ 460notesmodification may be required for proper fitment.

 

Chevy Silverado GMC Sierra Shorty Headers Truck 1999-06 48L 53L Engines
Chevy Silverado GMC Sierra Shorty Headers Truck 1999-06 (4.8L, 5.3L Engines)
Chevy Silverado GMC Sierra Shorty Headers Truck 1999-06 (4.8L, 5.3L Engines) - Race version with “no” air/egr fittings, 304 polished stainless steel. 1 5/8″ primaries/2 1/2″ collector, standard graphite manifold gaskets. Gains over 15rwhp. Mandrel bent tubing, cnc machined flanges. 1999-2006 (2wd & 4wd).

 

Stainless Steel Shorty Headers Fit For Chevy 396 402 427 454 502 BBC Camaro Chevelle
Stainless Steel Shorty Headers Fit For Chevy 396 402 427 454 502 BBC Camaro Chevelle
Stainless Steel Shorty Headers Fit For Chevy 396 402 427 454 502 BBC Camaro Chevelle - Made form 18 gauge steel tubing for bbc shorty style headers,stainless steel ,no weld-up. Easy direct bolt-on installation, require no modification. Shortie-style header maximum ground clearance. Add instant horsepower (10-15 hp) mandrel bent tubes. 1 3/4” primary tube diameter,3000” collector diameter,3/8” thick flange.

 

Hedman 88380 Standard-Duty Uncoated Shorty Headers 1979-93 Mustang 50L 302
Hedman 88380 Standard-Duty Uncoated Shorty Headers 1979-93 Mustang 5.0L 302
Hedman 88380 Standard-Duty Uncoated Shorty Headers 1979-93 Mustang 5.0L 302 - Durable and affordable. Highest quality materials. Hand tested sturdy leak proof welds. Computerized precision.

 

Flowtech 32103FLT Shorty Header
Flowtech 32103FLT Shorty Header
Flowtech 32103FLT Shorty Header - Primary tube diameter increases exhaust flow for increased performance and improves throttle response. 1-5/8 in. The oe style 2-1/2 inch ball and socket collector connects to factory exhaust head pipe. Headers are a must in you are using cold air intake, cat-back exhaust, or tuner. Mandrel bent tubing provide consistent tubing diameter for smooth flow and increased exhaust velocity. Heavy duty 16 gauge tubing provides increased strength and durability. They accommodate all factory oe components and include a premium aluminum header gasket. These shorty headers are the perfect combination of quality and value.

 

Pace Setter 70-1320 Black Shorty Exhaust Header
Pace Setter 70-1320 Black Shorty Exhaust Header
Pace Setter 70-1320 Black Shorty Exhaust Header - All tubing is mandrel-bent, 16-gauge carbon steel for excellent durability. Gaskets included. Available with standard black paint finish or optional armorcoat metallic ceramic coating. Cnc-machined, port-matched thick steel flanges provide postive seal at the head and unrestriced flow into the primary tubes. Unsurpassed fit and easy to install with basic skills.

 

Chevy Silverado GMC Sierra Shorty Headers Truck 2007-2013 48L 53L 60L 62L Engines
Chevy Silverado GMC Sierra Shorty Headers Truck 2007-2013 (4.8L, 5.3L, 6.0L, 6.2L Engines)
Chevy Silverado GMC Sierra Shorty Headers Truck 2007-2013 (4.8L, 5.3L, 6.0L, 6.2L Engines) - 1 5/8″ primaries/2 1/2″ collector, standard graphite manifold gaskets. Gains over 15rwhp. Mandrel bent tubing, cnc machined flanges. 2007-2013 (2wd & 4wd). Race version, 304 polished stainless steel.

 

PaceSetter 70-1346 Shorty Header for 2007-2009  48L 53L Chevy SilveradoGMC Sierra
PaceSetter 70-1346 Shorty Header for 2007-2009 4.8L, 5.3L Chevy Silverado/GMC Sierra
PaceSetter 70-1346 Shorty Header for 2007-2009 4.8L, 5.3L Chevy Silverado/GMC Sierra - Cnc-machined port-matched thick steel flanges provide postive seal at the head and unrestriced flow into the primary tubes. All tubing is mandrel-bent 16-gauge carbon steel for excellent durability. Available with standard black paint finish or optional armor coat metallic ceramic coating. Replaces stock exhaust manifolds for easy installation. Gaskets and hardware included.

 

Chevy Small Block CamaroChevelleNovaEl Camino Shorty Headers - Ceramic
Chevy Small Block Camaro/Chevelle/Nova/El Camino “Shorty” Headers – Ceramic
Chevy Small Block Camaro/Chevelle/Nova/El Camino “Shorty” Headers – Ceramic - The driver side header is 25 inches total length. These have the 3/8″ flange with 1-5/8″ tubing and a big 3″ collector end comes with studs, nuts and flange gaskets. Chevy ceramic coated “shorty” style headers. The passenger side header is 26 inches total length. Note see product description for compatible chevy models.

 

BFC-BuildFastCar 11-1001 Stainless Steel Exhaust Shorty Header Manifold Set For Chrysler 05-10 300Dodge 09-10 Challenger06-10 Charger05-07 Magnum V6 35L SOHC
BFC-BuildFastCar 11-1001 Stainless Steel Exhaust Shorty Header Manifold Set For Chrysler 05-10 300/Dodge 09-10 Challenger/06-10 Charger/05-07 Magnum V6 3.5L SOHC
BFC-BuildFastCar 11-1001 Stainless Steel Exhaust Shorty Header Manifold Set For Chrysler 05-10 300/Dodge 09-10 Challenger/06-10 Charger/05-07 Magnum V6 3.5L SOHC - Application fit vehicles 2005-2010 chrysler 300 v6 35l sohc 2009-2010 dodge challenger v6 35l sohc 2006-2010 dodge charger v6 35l sohc 2005-2007 dodge magnum v6 35l sohc. Each set is tested and dynoed to make sure the fitment and performance meet our goal. 2x 3-1 design inlet/outlet 200″ x 100″ (oval)/275″ utilizes factory o2 sensor position, o2 sensor bung is welded on tubing so stock o2 sensor can be plugged in. Increase horsepower and torque. Gain more performance due to more air flow better fuel mileage with improved combustion.

 

PaceSetter 72C1346 Shorty Header with Armor Coat for 48L 53L Chevy SilveradoGMC Sierra 2007-2009
PaceSetter 72C1346 Shorty Header with Armor Coat for 4.8L, 5.3L Chevy Silverado/GMC Sierra, 2007-2009
PaceSetter 72C1346 Shorty Header with Armor Coat for 4.8L, 5.3L Chevy Silverado/GMC Sierra, 2007-2009 - Replaces stock exhaust manifolds for easy installation. Armor coat metallic ceramic coating resists rust and corrosion and will not turn blue. Gaskets and hardware included. All tubing is mandrel-bent 16-gauge carbon steel for excellent durability. Cnc-machined port-matched thick steel flanges provide postive seal at the head and unrestriced flow into the primary tubes.

 

NEW SOUTHWEST SPEED BLACK BLOCK HUGGER SHORTY STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR GT40P V8 ENGINES 1 58 TUBES STREET ROD HOT ROD RAT ROD NOSTALGIA VINTAGE
NEW SOUTHWEST SPEED BLACK BLOCK HUGGER SHORTY STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES, 1 5/8″ TUBES, STREET ROD, HOT ROD, RAT ROD, NOSTALGIA, VINTAGE
NEW SOUTHWEST SPEED BLACK BLOCK HUGGER SHORTY STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES, 1 5/8″ TUBES, STREET ROD, HOT ROD, RAT ROD, NOSTALGIA, VINTAGE - Features 1-5/8″ tubes with 2-1/2″ collectors, complete with header bolts and gaskets and reducer bolts and gaskets | these headers are ground parallel with 350″ flanges on the cylinder head surface, and includes a pair of 2-1/2″ to 2-1/4″ reducers to complete the installation | designed primarily for engines with front mounts, in many instances these headers will fit and function perfectly with side mounts and under engine cross members | these headers cannot be used with a stock ford starter, and will require a starter that is 6-1/2″ or less from back of mounting flange to front of starter | you must use mini-starter # pmm 9503 with an automatic transmission and 5 speed manual transmissions | if you running a 3 or 4 speed manual transmission then you must use mini-starter # pmm 9504 mini-starter | note we strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, before ordering. Applications | cid 262, 265, 283, 302, 327, 350, 400 | fits all small block chevrolet v-8 engines with standard exhaust pattern | important | requires pmm 9503 mini-starter with automatic transmission and 5 speed | requires pmm 9504 mini-starter with 3 and 4 speed manual transmission | recommended engine mounts 400-7034 and 400-7035 left engine mount may need to be ground 1/4″ to clear collector | exclusions | cannot use stock ford starter, requires mini-starter pmm 9504 | will not work with large side engine mounts, recommended 65 mustang 289 engine mounts 400-7034 and 400-7035 | left hand, drivers side | mount may need to be ground 1/4″ to clear collector. Paint warning | these headers are painted with a high heat dull black paint | it will generally dull even more when the engine is started | the header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color | if exhaust temperatures are extreme at start the paint will blister and peel | there is no warranty on header paint. Features | ideal for engine swaps | great for street rods | tightest fitting and most compact header we sell | great choice to replace stock cast iron exhaust manifolds | more performance | better fuel mileage | 1-5/8″ tubes with 2-1/2″ collectors | includes a pair of 2-1/2″ to 2-1/4″ reducers | includes header bolts and gaskets and reducer bolts and gaskets | painted flat black to resist early corrosion. Pair of brand new southwest speed flat black block hugger shorty headers for small block ford 260-351ci windsor and gt40p engines (sws part # 440-2499) | this pair of southwest speed block hugger shorty headers are great for close or tight fit applications | they will work for installing small block ford engines in many different applications and are great for engine swaps where a specifically designed header is not available.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.