20 Coolest Bumper D Rings

 

Freedom Offroad 2007-2015 Wrangler JK Rock Crawler Front Bumper  D-Rings  Winch Plate
Freedom Offroad 2007-2015 Wrangler JK Rock Crawler Front Bumper + D-Rings + Winch Plate
Freedom Offroad 2007-2015 Wrangler JK Rock Crawler Front Bumper + D-Rings + Winch Plate - – textured black finish, direct bolt on., Bumper 46″ wide x 108″ deep., Includes stainless hardware., One piece welded design for ultimate strength, brackets for oe fog lights., Lifetime warranty.

 

Yescom Rock Crawler Textured Black Rear Bumper D-Ring Mount 2 Hitch Receiver for 07-16 Jeep Wrangler JK
Yescom Rock Crawler Textured Black Rear Bumper D-Ring Mount & 2″ Hitch Receiver for 07-16 Jeep Wrangler JK
Yescom Rock Crawler Textured Black Rear Bumper D-Ring Mount & 2″ Hitch Receiver for 07-16 Jeep Wrangler JK - Textured black finish, direct bolt on, easy to install (suitable for our bicycle carrier, b01k1ayygy). 07-16 jeep wrangler jk rear bumper with 2″ standard hitch receiver. Rugged, one-piece fully welded design for ultimate strength. Can be used to connect car, trailer or bike rack. High strength d-ring mounts welded inside and out with two 475 ton d-rings included.

 

EAG Stubby Front Bumper With D-Rings for 76-86 Jeep Wrangler CJ
EAG Stubby Front Bumper With D-Rings for 76-86 Jeep Wrangler CJ
EAG Stubby Front Bumper With D-Rings for 76-86 Jeep Wrangler CJ - Construction, manufactured from durable 5/32″ steel sheet and 2 3/8″ x 120 wall steel tubing textured black powder coat finish. Winch plate, bulit-in winch plate for up to 12,000lbs winches. Easy installation, eag front bumper is engineered to be a direct bolt-on upgrade replacement for your jeep’s original stock bumper reusing the factory mounting points no cutting or modifications required. Pre-runner hoop, bulit-in pre-runner hoop provides real protection for front grille. D-ring shackles, high strength d-ring mounts are welded on two 475 ton d-ring shackles and black isolators included.

 

Paramount Automotive 51-0008 87-06 Rear Bumper with D-Rings and 2 Inch Receiver
Paramount Automotive 51-0008 87-06 Rear Bumper with D-Rings and 2″ Inch Receiver
Paramount Automotive 51-0008 87-06 Rear Bumper with D-Rings and 2″ Inch Receiver - Manufactured from durable 5/32″ steel and 2″x120″ tubing. D-rings included, 475 ton capacity. D-ring mounts welded inside and out for increased strength. Comes in satin black finish.

 

EAG Jeep Wrangler JK Rock Crawler Front Bumper - D-ring Shackle - Winch Plate
EAG Jeep Wrangler JK Rock Crawler Front Bumper – D-ring Shackle – Winch Plate
EAG Jeep Wrangler JK Rock Crawler Front Bumper – D-ring Shackle – Winch Plate - One piece welded design for ultimate strength manufactured from 5/32″ cold rolled steel sheet and 2″x 120 wall steel tubing textured black powder coat for corrosion protection and durability. Fits 2007-2017 jeep jk wrangler all models bumper l 62″ w 13″and h 16″. D-ring mounts are welded on both inside and out for increased strength d-rings are included, 475 ton capacity each. Built-in winch plate for up to a 12,000 lbs winch welded hoop protects the front of the jeep wrangler jk two tabs on pre-runner hoop for extra off-road lights. Easy intallation no cutting and no drilling required.

 

Rear Metal 316 Thick Bumper D Ring Trailer Hitch HD For Wrangler 07-15 JK DFA1
Rear Metal 3/16 Thick Bumper D Ring Trailer Hitch HD For Wrangler 07-15 JK DFA1
Rear Metal 3/16 Thick Bumper D Ring Trailer Hitch HD For Wrangler 07-15 JK DFA1 - -Rugged and durable. Attention heavy duty thick wall steel. All mounting hardware included with this kit. Product details hit the trails with our stylish and rugged wrinkle black rear bumper. Installation instructions not provided. Highlights & features -thick steel with textured finish. Made from 3/16″ mild steel for strength and protection while out on the rocks or dirt trails. Installation hardware included. -Easy to install. Material rear bumper, steel d-rings, galvanized steel color rear bumper, black d-ring, silver what’s in the box 1 x wrinkle black metal rear bumper 1 x pair of bumper brackets 1 x installation hardware 1 x d-rings 1 x installation brackets what you might need for installation basic hand tools.

 

EAG Rock Crawler Front Bumper With OE Fog Light Hole Winch Plate D-ring  With Isolator  for 07-17 Jeep Wrangler JK
EAG Rock Crawler Front Bumper With OE Fog Light Hole & Winch Plate & D-ring ( With Isolator ) for 07-17 Jeep Wrangler JK
EAG Rock Crawler Front Bumper With OE Fog Light Hole & Winch Plate & D-ring ( With Isolator ) for 07-17 Jeep Wrangler JK - Fits 2007-2017 jeep jk wrangler all models bumper l” 68″ w 11″and h 17″. Built-in winch plate for up to 12,000lbs winches built-in oe fog light housing two tabs on pre-runner hoop for extra lights. Easy installation no cutting and no drilling required. Made of 5/32 inches steel sheet and 2 inches x 0120 inches steel tubing textured black powder coat for corrosion protection and durability. High strength d-ring mounts welded on both inside and outside two 475 t d-rings with isolators included.

 

Mallofusa Tail Rear Bumper D-Ring 2 Hitch Receiver for For Jeep Wrangler JK 2007-2016
Mallofusa Tail Rear Bumper D-Ring & 2″ Hitch Receiver for For Jeep Wrangler JK 2007-2016
Mallofusa Tail Rear Bumper D-Ring & 2″ Hitch Receiver for For Jeep Wrangler JK 2007-2016 - High strength d-ring mounts welded both inside and out for increased strength. 2″ receiver hitch incorporated into the bumper, two 475 ton d-rings included. Heavy duty 5/32 inches steel, durable textured black powder coat finish. Package includes 1 x rear bumper (all mounting hardware included). Brand new heavy duty rocker crawler rear bumper fits 2007-2017 jeep wrangler.

 

EAG Jeep JK Rock Crawler Front Bumper With D-Ring Winch Mount Plate
EAG Jeep JK Rock Crawler Front Bumper With D-Ring & Winch Mount Plate
EAG Jeep JK Rock Crawler Front Bumper With D-Ring & Winch Mount Plate - Easy installation, direct bolt on no drilling or cutting required. Built-in winch plate supports up to a 12,000 lbs winch two tabs on pre-runner hoop for extra lights the special tubular design is polished to a mirror finish. Fits 2007-2018 jeep wrangler jk all models bumper l 69″ w 12″ and h 19″. Made of 5/32 inches steel sheet and 2″x 120 wall steel tubing textured black powder coat for corrosion protection and durability. The d-ring mounts are welded on both inside and outside for extra strength two 475 ton capacity d-ring shackles are included.

 

Smittybilt 76750D SRC Classic Rear Bumper with D-Ring
Smittybilt 76750D SRC Classic Rear Bumper with D-Ring
Smittybilt 76750D SRC Classic Rear Bumper with D-Ring - Smittybilt src classic rear bumper with d-ring is crafted from high quality steel tubing and robotically welded for the utmost precision, each tubular bumper is specially treated with a zinc undercoating, followed by a dual powdercoat painted finish, ensuring heavy duty performance and style. This unit is put through a variety of tests under extreme and unusual conditions to ensure high quality and dependability.

 

E-Autogrilles 07-17 Jeep Wrangler JK Full Width Rear Bumper With D-Ring and Hitch Receiver-Textured Black 51-0369
E-Autogrilles 07-17 Jeep Wrangler JK Full Width Rear Bumper With D-Ring and Hitch Receiver-Textured Black (51-0369)
E-Autogrilles 07-17 Jeep Wrangler JK Full Width Rear Bumper With D-Ring and Hitch Receiver-Textured Black (51-0369) - Full width bumper offers maximum protection and line up with the factory fender flares. Full width rear bumper with two d-rings and 2″ hitch reveiver for 2007-2017 jeep wrangler jk 2-door / 4-door. The d-ring mounts are welded on both inside and outside for extra strength d-rings included 475 ton capacity each 2″ standard hitch receiver included in rear bumper. Made of 5/32″ steel sheet textured black powder coat finish for corrosion protection and durability. Easy bolt-on installation.

 

EAG Rear Bumper with D-ring Hitch Receiver for 76-86 Jeep Wrangler CJ
EAG Rear Bumper with D-ring & Hitch Receiver for 76-86 Jeep Wrangler CJ
EAG Rear Bumper with D-ring & Hitch Receiver for 76-86 Jeep Wrangler CJ - Material & finish, made of 5/32″ steel sheet textured black powder coat finish for corrosion protection and durability. D-ring shackles, the d-ring mounts are welded on both inside and outside for extra strength two 475 ton capacity d-ring shackles are included. Easy installation, direct bolt on no drilling or cutting required. Receiver hitch, 2″ standard hitch receiver included. Robotically welded, use of laser-cutting, cnc folding and robotic assembly welder.

 

Fab Fours M1850-1 Front Bumper D-Ring - Pair
Fab Fours M1850-1 Front Bumper D-Ring – Pair
Fab Fours M1850-1 Front Bumper D-Ring – Pair - Ranch d-ring mount. M18501.

 

GSI Rock Crawler Front Bumper with D-Ring and Winch Plate Ready&OE Fog Lights Hole-Textured for 07-17 Jeep Wrangler JK
GSI Rock Crawler Front Bumper with D-Ring and Winch Plate Ready&OE Fog Lights Hole-Textured for 07-17 Jeep Wrangler JK
GSI Rock Crawler Front Bumper with D-Ring and Winch Plate Ready&OE Fog Lights Hole-Textured for 07-17 Jeep Wrangler JK - D-ring mounts welded both inside and out for increased strength d-rings included, 475 ton capacity each. Fits 07-17 jeep wrangler jk manufacture from 5/32 inches steel sheet and 2 inches x 0120 inches steel tubing. Oe fog light housing perfect for oe fog light. Durable textured black powder coat finish. Built-in winch plate for up to 12,000lbs winches.

 

EAG 87-06 Jeep Wrangler TJYJ Black Textured Off Road Stinger Front Bumper with 2 D-ring 51-0027
EAG 87-06 Jeep Wrangler TJ/YJ Black Textured Off Road Stinger Front Bumper with 2 D-ring (51-0027)
EAG 87-06 Jeep Wrangler TJ/YJ Black Textured Off Road Stinger Front Bumper with 2 D-ring (51-0027) - Fit 1987-2006 jeep wrangler tj/yj all models. D-ring mounts welded both inside and out for increased strength d-rings included-475 ton capacity each. Manufactured from 3/16″ cold rolled steel sheet and 2″x012″ seamless steel tubing one piece welded design for ultimate strength. Installation instructions are not provided professional installation recommended no cutting and no drilling required. Textured black powder coat for corrosion protection and durability.

 

Paramount Automotive 51-0007 Front Bumper with D-Rings
Paramount Automotive 51-0007 Front Bumper with D-Rings
Paramount Automotive 51-0007 Front Bumper with D-Rings - Comes in satin black finish. D-ring mounts welded inside and out for increased strength. D-rings included, 475 ton capacity. Manufactured from durable 5/32″ steel and 2″x120″ tubing. Classic bumper design offer a modern twist to a classic design.

 

EAG Front Bumper With D-Rings for 87-06 Jeep Wrangler TJYJ
EAG Front Bumper With D-Rings for 87-06 Jeep Wrangler TJ/YJ
EAG Front Bumper With D-Rings for 87-06 Jeep Wrangler TJ/YJ - Finish, textured black powder coat finish. Winch plate, bulit-in winch plate for up to 12,000lbs winches. Construction, manufactured from durable 5/32″ steel sheet and 2 3/8″ x 120 wall steel tubing. Easy installation, eag front bumper is engineered to be a direct bolt-on upgrade replacement for your jeep’s original stock bumper reusing the factory mounting points. D-ring shackles, high strength d-ring mounts are welded on two 475 ton d-ring shackles and black isolators included.

 

E-Autogrilles Black Textured Rear Bumper With D-ring for 07-13 Toyota Tundra
E-Autogrilles Black Textured Rear Bumper With D-ring for 07-13 Toyota Tundra
E-Autogrilles Black Textured Rear Bumper With D-ring for 07-13 Toyota Tundra - Useful design, provisions for license plate lights designed to not obstruct your factory receiver hitch. High quality material, made of durable 5/32″ steel sheet high quality black powder coated for corrosion protection and durability. Compatiblity, 2007-2013 toyota tundra. D-rings with isolator included, the d-ring mounts are welded on both inside and outside for extra strength the isolators are designed to prevent recovery shackles from rattling against anchor points. Optional drilling, need drilling reverse sensor mounting port & license mounting holes & spare tire crank access port.

 

Explorer Pro Comp 66168 Black Bumper with D-Ring
Explorer Pro Comp 66168 Black Bumper with D-Ring
Explorer Pro Comp 66168 Black Bumper with D-Ring - Rock crawler rear bumper w/d-ring black. Stainless steel design is polished to a mirror finish. One-piece design is robotically welded for extreme durability. Assured high quality and dependability. Tested under extreme conditions.

 

EAG Rock Crawler Tubular Black Front Bumper Off Road With D-ring Shackles for 07-18 Jeep Wrangler JK
EAG Rock Crawler Tubular Black Front Bumper Off Road With D-ring Shackles for 07-18 Jeep Wrangler JK
EAG Rock Crawler Tubular Black Front Bumper Off Road With D-ring Shackles for 07-18 Jeep Wrangler JK - Fit 2007-2017 jeep jk wrangler all models bumper l 67″ w 16″and h 15″. Easy installation no cutting and no drilling required. One piece welded design for ultimate strength manufactured from 5/32″ cold rolled steel sheet and 2″x012″ steel tubing textured black powder coat for corrosion protection and durability. Welded hoop protects the front of the jeep wrangler jk two tabs on pre-runner hoop for extra off-road lights side tube provide fender protection tested under extreme conditions. D-ring mounts welded both inside and out for increased strength d-rings included-475 ton capacity each 2 d-rings included.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.